Tip: buy some decent 3.2mm drill bits, cheapo ones break/go blunt in seconds.
 |
| From Zero 010510 |
Includes the step where the furthermost forward panels are on the gearbox side of the tubes for a bit more footroom. Gearbox was checked to make sure it allowed this arrangement without hitting panels.
 |
| From Zero 010510 |
Horrible gooey black sealant stuff used, needs wiping off with white spirit when it squeezes out the side during riveting. P.S. those lazy-tongs riveters would never fit in the gaps, just a normal hand riveter seems best.
 |
| From Zero 010510 |
No comments:
Post a Comment