On the other end of the rubber bit, I had some mounts left over from I think a mk2 Escort RS2000, probably from Rally Design. The Zero chassis was then drilled to suit, and all bolted up with nylocs.
Friday 26 November 2010
Engine Mount
Engine mounts were made using a piece of 5mm mild steel drilled to suit the holes in the block, with some 3x 1.5" box section with a cap welded on the end. In this cap an 8mm hole drilled, and some heavy duty Capri engine rubber mounts used, these have an M8 stud sticking out each end.
On the other end of the rubber bit, I had some mounts left over from I think a mk2 Escort RS2000, probably from Rally Design. The Zero chassis was then drilled to suit, and all bolted up with nylocs.
On the other end of the rubber bit, I had some mounts left over from I think a mk2 Escort RS2000, probably from Rally Design. The Zero chassis was then drilled to suit, and all bolted up with nylocs.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment