Throttle cable action - used a bike brake cable, the barrel shaped nipple on the cable fitted into the original Saab throttle linkage. At the other end a cable nipple from ebay was purchased. The threaded adjuster is off an old bike brake lever I had in my stock of bits and pieces I've hoarded in the garage. You never know when things come in handy!
 |
| From Zero 020511 |
The aluminium plate bolted onto existing holes in the throttle body, to provide a cable stop. Shaped with a hacksaw and files, from strips of aluminum and aluminium angle, then low-temp welded/brazed again.
 |
| From Zero 020511 |
No comments:
Post a Comment